Video Audio Video
The size and weight of the new plasma TVs have created all kinds of innovative methods for mounting the sets. There are cabinets that have custom motorized mounting brackets that slowly raise the TV from the hidden recesses of the cabinet to a prescribed viewing height through remote control. But one of the neatest mounts used the hardware from this type of installation to create a unique plasma TV ceiling mount.
The hardware was designed as a full-motion motorized stand mount. It was made to fit inside a custom built cabinet. At the push of a button on the remote control, the plasma TV was rise up pushing open a concealed door in the top of the cabinet. As the TV display came into view, the power to the TV would switch on and the set would come to a stop just as the selected program came on.
One flat panel owner wanted to use the same design criteria except for one factor. Instead of rising up out of a cabinet, he wanted his TV to descend from his cathedral ceiling. Once it was fully descended to a viewing height, he could manipulate the TV to swivel and tilt to place the screen in a good viewing angle to where he was sitting at any particular time.
After consulting with the manufacturer of the hardware and the engineers that made the plasma TV it soon became evident that the man could have what he wanted. The hardware was purchased and the homeowner met with a couple of professional remodeling contractors to discuss what he wanted to do. Soon the plan was formalized and the project was underway.
The viewing room for the installation was selected as the family room. The cathedral ceiling began at the top of the nine-foot wall and angled upward to the peak at sixteen feet above the floor. The ceiling had been a typical drywall ceiling with textured finish. Part of the remodel was to replace the textured drywall ceiling with a stained redwood strip ceiling. Hundreds of pieces of stained redwood would be laid out in parallel with a quarter inch gap between each strip. Near the bottom of the ceiling approximately one foot from where it meets the wall, the homeowner wanted to have the TV installed in a hidden manner above the ceiling panels.
After a great deal of work, the contractors finally had success. Careful craftsmanship had completely hidden the ceiling mount behind the new wooden surfaced ceiling. At the push of a button, the lights slowly faded to darkness. Then one of the redwood strips slowly hinged open and the new plasma TV descended to a vertical position. Another button was pushed on the remote and the big screen TV swiveled and tilted to where the homeowner could easily see his favorite program. What an innovative installation they had concocted together!
Your plasma TV ceiling mount need not be so elaborate, but this article shows that imagination is the only thing to limit how you may install your next television.
A plasma TV bracket allows for the television to be hung on the wall similar to a picture frame which can free up valuable living space but choosing the right plasma TV bracket for your particular flat panel is a very important step.
Whats On My YouTube Today?
Pretty Ricky - Your Body (video) Amended Version audio
Here Are A Few Items From Amazon You Might Be Interested In.
| Account limit of 2000 requests per hour exceeded. |
Items recently purchased on this site:
Thanks for visiting!
Tags: video, video audio video audio cables, media, video audio video sync mp4, audio video sync test video, video audio video converterFiled under: Video Games
Like this post? Subscribe to my RSS feed and get loads more!